Millimeters to Inches Converter
Free online mm to inches tool. Fast, private, runs entirely in your browser. No signup required.
Quick convert:
How to Convert Millimeters to Inches
One inch is defined as exactly 25.4 millimeters. This relationship was established internationally in 1959 when the inch was standardized to the metric system. Millimeters are widely used in engineering, manufacturing, and science, while inches remain common in the US, UK, and Canada for everyday measurements.
Formula: mm to Inches
Inches = mm ÷ 25.4Formula: Inches to mm
mm = Inches × 25.4Example: Convert 50 mm to Inches
- Divide by 25.4: 50 ÷ 25.4 = 1.9685 inches
- So 50 mm is approximately 2 inches (just under)
- A US quarter coin is about 24.26 mm (0.955 inches) in diameter
Millimeters to Inches Chart
| Millimeters | Inches | Fraction (approx) |
|---|---|---|
| 1 mm | 0.0394 in | ~1/25 |
| 2 mm | 0.0787 in | ~5/64 |
| 3 mm | 0.1181 in | ~1/8 |
| 5 mm | 0.1969 in | ~13/64 |
| 6 mm | 0.2362 in | ~15/64 |
| 8 mm | 0.3150 in | ~5/16 |
| 10 mm | 0.3937 in | ~25/64 |
| 12 mm | 0.4724 in | ~15/32 |
| 15 mm | 0.5906 in | ~19/32 |
| 20 mm | 0.7874 in | ~25/32 |
| 25 mm | 0.9843 in | ~63/64 |
| 30 mm | 1.1811 in | 1 3/16 |
| 40 mm | 1.5748 in | 1 37/64 |
| 50 mm | 1.9685 in | 1 31/32 |
| 75 mm | 2.9528 in | 2 61/64 |
| 100 mm | 3.9370 in | 3 15/16 |
| 150 mm | 5.9055 in | 5 29/32 |
| 200 mm | 7.8740 in | 7 7/8 |
| 250 mm | 9.8425 in | 9 27/32 |
| 300 mm | 11.8110 in | 11 13/16 |
Inches to Millimeters Chart
| Inches | Millimeters |
|---|---|
| 1/16 in | 1.5875 mm |
| 1/8 in | 3.175 mm |
| 1/4 in | 6.35 mm |
| 3/8 in | 9.525 mm |
| 1/2 in | 12.7 mm |
| 5/8 in | 15.875 mm |
| 3/4 in | 19.05 mm |
| 7/8 in | 22.225 mm |
| 1 in | 25.4 mm |
| 2 in | 50.8 mm |
| 3 in | 76.2 mm |
| 4 in | 101.6 mm |
| 5 in | 127 mm |
| 6 in | 152.4 mm |
| 8 in | 203.2 mm |
| 10 in | 254 mm |
| 12 in | 304.8 mm |
| 18 in | 457.2 mm |
| 24 in | 609.6 mm |
| 36 in | 914.4 mm |
When Do You Need mm to Inches Conversion?
Engineering and manufacturing frequently require converting between millimeters and inches. CNC machining, 3D printing, and woodworking often deal with blueprints in one system while tools are calibrated in the other. A drill bit labeled 6 mm equals approximately 15/64 inches — close to but not exactly a standard imperial size.
Screen sizes and electronics also bridge both systems. Phone screen dimensions are marketed in inches but component specs use millimeters. Camera sensors, lens mounts, and screw threads (M3, M4, M5) are all specified in millimeters globally.
In jewelry, gem sizes are measured in millimeters while ring sizes vary by country. A 6 mm gemstone is approximately 1/4 inch across. Understanding this conversion helps when shopping internationally or comparing specifications.